Saturday, December 29, 2007

Jay Leno's 8.2L 600hp Corvette Z06


The popularity of American television talk show host, Jay Leno, is almost rivaled by his well-known love of cars. With one of the world's largest private collections of automobiles spanning almost 100 years, Leno's enthusiasm is unquestionable. As a spokesperson for GM, Leno has made appearances at the SEMA show in Las Vegas for the past few years and this year is no different. But this time, the vehicle being presented is a project car that Leno was directly involved.

Leno sought the expertise of official GM racing team, Pratt & Miller, who specializes in the engineering of American Le Mans Series Corvette C6.R race cars. The objective was to build a Corvette Z06 capable of running on E85 ethanol. However, the project was more than converting the LS7 engine to run on alternative fuel. A custom built 8.2L (500-cubic-inch) all-aluminum small-block V-8 that pumps out approximately 600 horsepower and 585 lb.-ft. of torque was the result.

Although, it uses stock LS7 cylinder heads, intake system and dry-sump oiling system, the engine was milled from a solid block of billet aluminum. Developed by Katech Engines for Pratt & Miller the engine also uses forged steel crankshaft, forged rods and forged pistons. Naturally, the fuel system control unit was modified to accommodate E85 fuel and the blueprinted and reinforced T-56 six-speed transmission uses a high-performance Centerforce dual-friction clutch.

For the exterior, Leno wanted his C6RS to be a street-legal replica of the C6.R race cars and Pratt & Miller included an arsenal of carbon fiber components off their C6.R parts shelves. From the press release below, “...with wider front and rear fenders and a wider rear fascia with an integrated spoiler on top and a racing-style diffuser at the bottom (the diffuser incorporates an LED-lit backup lamp). A C6.R-style waterfall hood front fender louvers, rockers and lower grille opening further define this special Corvette – and all of the car’s front-end panels are made of carbon-fiber, including custom brake air ducts routed through the front fenders. With all of its body modifications, Leno’s C6RS is 1.6 inches wider than stock.”

Like many before him, Leno wanted to prove the polluting stigma associated with performance cars is not permanent and that alternative fuel technology can make the same results if not better. For full details see press release below.










Press Release

GREEN AND MEAN: JAY LENO’S E85-CAPABLE Z06-INSPIRED C6RS CORVETTE BOASTS 600 HP AND ALTERNATIVE-FUEL CAPABILITY

“Tonight Show” host Jay Leno’s predilection for performance cars is no secret, but many fellow enthusiasts may not know that he is keenly interested in alternative fuels. To prove that red-blooded power mixes easily with a touch of green, Leno partnered with Pratt & Miller – the engineering company that builds and campaigns C6.R Corvettes – to develop a modified Corvette Z06 that is capable of running on E85 ethanol. It was unveiled at the 2007 SEMA Show.

More than merely a conversion of the stock LS7 engine to E85 capability, Leno’s alternative-fuel supercar is powered by a custom, 8.2L (500-cubic-inch) all-aluminum small-block V-8 that pumps out approximately 600 horsepower and 585 lb.-ft. of torque.

“The C6RS is the result of an idea we hatched to prove that high-performance cars and alternative fuel technology weren’t diametrically opposed concepts,” said Leno. “I love the idea of having 600 horsepower at my disposal, but using a homegrown alternative to gasoline.”

The engine is built around a custom aluminum cylinder block that was CNC-milled from a single block of billet aluminum. And while the cylinder heads, intake system and dry-sump oiling system are stock LS7 components, the engine – which has larger bore and stroke dimensions than the 7.0L (427-cubic-inch) LS7 – uses a one-off reciprocating assembly, including a forged steel crankshaft, forged rods and forged pistons. Katech Engines, the company that builds engines for the Corvette C6.R racing program, developed the engine.

The fuel system and engine control computer were modified to accommodate E85, and spent gases exit through a Corsa exhaust system. Supporting the 600-horse engine’s power is a blueprinted and strengthened T-56 six-speed transmission and a high-performance Centerforce dual-friction clutch.

C6.R inspiration

On the outside, Leno’s bad and black C6RS emulates the styling of C6.R racecars, with wider front and rear fenders and a wider rear fascia with an integrated spoiler on top and a racing-style diffuser at the bottom (the diffuser incorporates an LED-lit backup lamp). A C6.R-style waterfall hood front fender louvers, rockers and lower grille opening further define this special Corvette – and all of the car’s front-end panels are made of carbon-fiber, including custom brake air ducts routed through the front fenders. With all of its body modifications, Leno’s C6RS is 1.6 inches wider than stock.

The C6.R’s – and production Corvette’s – aerodynamically styled bodywork is designed to slice efficiently through the wind, which helps enhance fuel mileage.

The race-ready look of the car is enhanced with a quartet of BBS wheels that feature racing-type locking center hubs. The forged aluminum 18-inch front wheels and 19-inch rear wheels ride on Michelin P295/30ZR18 and P345/30ZR19 tires, respectively.

Adding authenticity to the car’s custom bodywork was the involvement of Pratt & Miller. The company took on the task of crafting Leno’s Corvette into a street-going replica of the racecars, which included installing or fabricating a host of unique components, including:

  • A custom DeWitt high-capacity radiator with dual cooling fans

  • A carbon-fiber ram-air induction system

  • Carbon-fiber inner fender panels that vent hot air from the engine compartment

  • Brembo brakes with six-piston mono-block calipers in front and four-piston rear calipers

  • Dyna-Mat used throughout the cabin and chassis to reduce interior noise

While the exterior and drivetrain were inspired by the racetrack, the C6RS’s cabin exudes luxury, with premium touches and enhancements from Genuine Corvette Accessories that include a two-tone shift knob and boot; leather-covered console armrest, parking brake handle and boot; an interior trim kit, racing-style pedal covers and more.

With its 600 horses on tap and domestically produced E85 fuel in the tank, Jay Leno’s alternative-fueled C6RS is an all-American supercar that proves high performance and environmental consciousness go together like the Corvette and checkered flags.




Related entries:

Two Unique Chevrolet Indy 500 Pace Cars